Toolbar

  • Open Map — Open and edit an existing map file. Commissioner map files use the .MAP file extension.
  • Save Map — Manually save your work.
  • Add Zone — Add one or more zones to the map file. A zone specifies the active power, inactive power, and sensor delay settings for all fixtures assigned to that zone.
  • Add Fixtures — Add one or more fixtures to the map file. There are three paths for adding a fixture via this tool: (1) add the fixture via USB cable connection, (2) add the fixture through wireless discovery, and (3) add the fixture manually by typing the serial number.
  • Sync Map — Wirelessly update the fixtures in the facility.
  • Verify Map — Wirelessly compare the settings in use to the settings in the map file. If the settings in use do not match the map file, perform a sync action.
  • Assign Gateway — Add a Digital Lumens lighting gateway to the map file. Each lighting gateway is associated with a unique network ID.
  • Select — Select one or more objects on the map grid.
  • Adjust Fixture Spacing — After selecting multiple fixtures, click and drag to adjust the spacing between each fixture. This is especially effective if you've already created a fixture grid.
  • Zoom In — Increase the magnification of the map.
  • Zoom Out — Decrease the magnification of the map.
  • Zoom to Fit — Auto-resize the map so it is fully visible in the map view.

Tip: When you change the map file by adding fixtures, zones, or networks, you must Sync the Map. Otherwise, the map file will be up-to-date, but the settings in use by the fixtures and lighting gateways out in the facility will still reflect old settings.

Last modified: August 11, 2016 02:00:37 PM