Verify the Map

If you are unsure if the fixtures, zones, and networks in your map file are synced, use the Verify Map wizard to perform a status check.

There are two methods for verifying the map: (a) You can verify wirelessly from a laptop while standing in the affected area or (b) You can verify from a remote location by connecting your laptop to the lighting network using a Cat-5 cable.

Verify the map — Wireless Method

1. Ensure that the USB Wireless Adapter is still connected to your computer.
2. Click Verify Map.
3. To add or change fixtures, if none are currently selected, click the Fixtures, Zones, or Networks radio button and make selections. If verifying fixtures only, you must select specific fixtures from the list.
4. Click Next to proceed with verification.
   • Any zones and fixtures requiring syncing appear with red icons in the list.
   • Any zones or fixtures with which Commissioner cannot communicate appear with "badge" icons. Try moving physically closer to the zones / fixtures in question and then click Verify Map.
5. When the verification process is complete, click Finish.
6. Sync the Map file, as necessary.

Verify the map — Verify via Gateway Method

1. With your laptop connected to the lighting network via a switch, and with the lighting network stopped in LightRules, use your laptop to verify. For details, see Lighting Gateway Operations.
2. Click Verify Map and run the verify wizard to ensure that all the programmed settings for all fixtures, zones, and networks match the map file.

Last modified: August 11, 2016 01:52:19 PM