Update Fixture Firmware

Commissioner software features a firmware update wizard.

Tip: To rapidly identify fixture firmware versions, open the fixtures tab, and scroll to the "Firmware" column.

Note: If this is your first time installing firmware, request assistance Digital Lumens prior to beginning the procedure.

Update a Single Fixture's Firmware

1. Select a fixture on the map grid or in the fixtures tab.
2. Go to Edit > Update Firmware.
3. Browse to and select the firmware .ZIP file, then click Next.
4. Select the firmware image from the list, then click Next.
5. Once the update is complete, click Done to exit.

Update the Firmware of Multiple Fixtures

1. Select multiple fixtures on the map grid or in the fixtures tab.
2. Go to Edit > Update Firmware.
3. Browse to and select the firmware .ZIP file, then click Next.
4. Select the firmware image from the list, then click Next.
5. Once the update is complete, click Done to exit.

Update the Firmware of All Fixtures in a Zone

1. Select a zone in the zones tab.
2. Go to Edit > Update Firmware.
3. Browse to and select the firmware .ZIP file, then click Next.
4. Select the firmware image from the list, then click Next.
5. Once the update is complete, click Done to exit.

Note: To update the firmware, the version must be newer than the installed firmware version. Otherwise, Commissioner will not allow the upgrade.

Last modified: August 11, 2016 01:37:59 PM